Direct answer

Thermo King Alarm 807 is listed as “Fuel Temperature Sensor Error” for Truck/Trailer Refrigeration Unit in the source record linked below. This tells you what the alarm is called; it does not, by itself, identify a failed part or prove that every Thermo King model uses the code in the same way.

Before acting, compare the machine label, product family, controller and displayed characters with the exact manual or support page for that equipment.

Operating guidance: Do not decide continued operation from the code alone.

What the source says

  • Displayed code: Alarm 807
  • Manufacturer description: Fuel Temperature Sensor Error
  • Current product scope: Thermo King Truck/Trailer Refrigeration Unit
  • Model/controller coverage: Not specified in the current dataset; confirm it in the source before using the meaning.

Safe next steps

  1. Record the complete code exactly as shown, including spaces, prefixes and leading zeros.
  2. Record the model number, controller name, firmware if visible, and what the machine was doing when the code appeared.
  3. Follow the owner-safe action captured with this record: Report alarm at end of day.
  4. Do not repeatedly clear or reset an alarm. A returning code needs model-specific diagnosis.
  5. Stop and escalate if there is smoke, a burning smell, leakage, abnormal pressure, unusual movement, repeated breaker trips or any risk to people.

Safety boundary

Limit owner action to external observation and the published manufacturer action. Internal electrical, fuel, pressure or sealed-system work belongs with qualified personnel. Follow the equipment manual, workplace energy-control procedure and local requirements before service work.

What this code does not prove

An alarm name is not a confirmed root cause. Wiring, sensors, operating conditions, installation issues, controller configuration and upstream faults can produce similar symptoms. Do not replace a component solely because its name appears in the code description.

Applicability check

This record is organized at the Truck/Trailer Refrigeration Unit level. The seed data does not identify every compatible model, production year, controller or firmware revision. If the source does not cover the nameplate on your machine, treat this page as a possible match and continue with the correct manual rather than forcing the code to fit.

Source and verification

  • Primary source used for this record: thermoking.com
  • Source checked in the project dataset: 2026-05-01
  • Evidence status: The code meaning is source-linked; exact model/controller applicability still requires confirmation.

The linked source takes priority if its wording, status colour or operator action differs from this page. See how sources are selected and the editorial policy.

When to contact qualified service

Escalate when the code returns after the permitted owner action, the model is outside the confirmed source scope, continued operation is unclear, or diagnosis requires panels, live measurements, fuel, refrigerant, pressure, high voltage, stored energy or moving machinery.

FAQ

What does Thermo King Alarm 807 mean?

Thermo King lists Alarm 807 as ‘Fuel Temperature Sensor Error’ for the product scope shown here. Confirm the exact model and controller against the linked source.

What should I do when Alarm 807 appears?

Report alarm at end of day. Stop if the condition repeats, the machine behaves abnormally, or the work would require opening a hazardous system.

Does Alarm 807 mean the same thing on every Thermo King model?

Not necessarily. Code meanings and allowed actions can vary by product family, model, controller and firmware.