Eppendorf Centrifuge 5702 Error Er 8: Causes & Fixes
Error occurs when the device accelerates or brakes and the centrifuge brakes.
Browse published troubleshooting notes by brand, product, and error code.
Error occurs when the device accelerates or brakes and the centrifuge brakes.
Voltage drop while actuator is on.
Overvoltage.
Valve 1 fault.
Valve 2 fault.
Engine over temperature.
Low oil pressure.
Overspeed.
Overcrank alarm; the unit turns over but will not start.
Overcrank alarm; the unit turns over but will not start.
Overspeed alarm.
Long freeze cycle.
Long harvest cycle.
Input power loss.
Low pressure switch open.
High pressure switch open.
Check Ambient Temp Sensor
Check Evaporator Coil Sensor (Zone)
Check (Control); Return Air Sensor (Zone)
Check (Control); Discharge Air Sensor (Zone)